TC206N 12" 60T Arbor=1" to 5/8" Saw Blade Circular Carbide for WOOD with NAILS
Click the dropdown below to make your price selection
Click dropdown below to select a shipment schedule:
SKU: tc206n

Circular Saw Blade CARBIDE for WOOD with NAILS
12 inch 60 Tooth
Arbor Size=1" shimmed to 5/8"
Tungston Carbide Tipped
Suitable for use with a table saw, chopsaw, miter saw and for some specialized beam cutting circular saws/skilsaws

This blade has a 1" arbor and comes with arbor shims to adapt
to a 5/8” arbor.  ATB (alternate top bevel) 
For cutting wood with embedded nails, for demolition work or dismantling pallets. 

Free Shipping is only to U.S. Addresses
Mixing of free shipping items with non free shipping items will void free shipping

Unlock Extra Savings on Bulk Orders!

SPECIFICATIONS

DESCRIPTION: 12"*60T*25.4*2.0 with washer15.88
BODY
: 1.8mm 50 steel with hardness of 42, surface flatness is within 5 wires.

TOOTH: 6.0*2.0*3.5mm
TOOTH WELDING: Copper with a brazing temperature of 450 centigrade.
TIP: tip size OKE 60*20*35mm, body thickness 2.0mm
CARBIDE SPECS: YG6
Main components are tungsten and cobalt (International number is YG6)
Formula is 6% cobalt, 94% tungsten.  
The tooth hardness is 91. 
Design is a compromise to make it harder to break the tooth while staying
sharp for cutting pallet wood.

INSTRUCTIONS FOR MOUNTING BLADE:

Put 3 to 4 arbor shims on a 5/8” arbor. 
Install the blade near the threads and push it back so that all the arbor shims are
against the backing.  Then lift the blade slightly and slide it over and onto the arbor
shims.  Make sure it does not fall between the arbor shims. 
Install the nut and tighten making sure blade is secure.

CLICK HERE for other Saw Blades

WARNING! To prevent serious injury ALWAYS wear eye, face & body protection.

Click here for Safety Products

 

 

 

 

 

Write your own review
  • Only registered users can write reviews
Bad
Excellent