TC206N 12"60T for Wood with Nails 1" Arbor shim to 5/8"
Click the dropdown below to make your price selection
Click dropdown below to select a shipment schedule:
SKU: tc206n
Short Description:
Circular saw blade - 12" Carbide Tipped for cutting Wood with Nails, circular saws, chop saws and table saws.
Detail Description:

This blade has a 1" arbor and comes with arbor shims to adapt to a 5/8” arbor.  ATB (alternate top bevel) 

For cutting wood with embedded nails, for demolition work or dismantling pallets. 

Put 3 to 4 arbor shims on a 5/8” arbor.  Install the blade near the threads and push it back so that all the arbor shims are against the backing.  Then lift the blade slightly and slide it over and onto the arbor shims.  Make sure it does not fall between the arbor shims.  Install the nut and tighten making sure blade is secure.

McGills Warehouse, quality products at low prices every day.


BODY -- 1.8mm 50 steel with hardness of 42, surface flatness is within 5 wires.

TOOTH -- 6.0*2.0*3.5mm  Main components are tungsten and cobalt (International number is YG6) Formula is 6% cobalt, 94% tungsten.  The tooth hardness is 91.  Designee is a compromise to make it harder to break the tooth while staying sharp for cutting pallet wood.

TOOTH WELDING -- Copper with a brazing temperature of 450 centigrade.


DESCRIPTIONTIP specificationsCarbide specifications

12"*60T*25.4*2.0 with washer15.88  

(wood and nail circular saw blade)

tip size OKE 60*20*35mm,

body thickness 2.0mm





Click ADD TO CART button below to purchase or CLICK HERE for other Blades

Write your own review
  • Only registered users can write reviews